Software changes or updates can only be done by experts, not by end-users.

Yes, all electrical standards for the European markets are fulfilled.

Basically all CE requirements are fulfilled with the LegaDrive adjustment system. Testing has been conducted successfully with sample desks.According to European standards incomplete machines must not be CE marked. The LegaDrive adjustment system is treated as such an incomplete machine. Only a complete operational system (height adjustable desk) can be CE marked.

The TCO 04 standard was considered during development of LegaDrive. But the requirements focus on desks, not on lifting columns.

The EN standards have been considered during design of LegaDrive. But the EN standards apply to desks not to lifting columns.

Testing according to GS was considered during design of LegaDrive. But the requirements refer to desks, not to lifting columns or desk frame systems. For the LegaDrive adjustment system or the LegaDrive Systems desk frame a GS mark can not be obtained. However, a type certificate is available for the LegaDrive Systems desk frame that has passed tests in accordance with the GS directive. A GS certificate for a reference desk is also available. These certificates simplify the GS certification process for the complete desk by the desk manufacturer.

Yes, the LegaDrive adjustment system contains a system for collision detection (ISP=Intelligent System Protection). This system protects the desk against damage. Like all systems on the market, it is not adequate to protect persons.

Yes, the LegaDrive adjustment system offers soft start and soft stop functionality.

Yes, the LegaDrive control unit detects if the number of connected LegaDrive lifting columns is matching to the number from the parameter set. Only then the operation of the LegaDrive system is possible.

No, the LegaDrive Eco lifting column does not need any maintenance.