Configuration shelf III
The wall unit shelf version III is equipped with 2 glass shelves (6 mm thick) that rest loosely. We recommend the use of safety glass (ESG) or Plexiglas. For wall mounting, you can choose between direct wall mounting through the profile or concealed wall mounting, for which a cut-out in the profile is necessary.
Please enter the external dimensions of the shelf below, select the desired surface and then click on the Start button:
Value  Width max. 1200 mmHeight max. 1200 mmDepth max. 400 mm |
Input |
|---|---|
(1) Width in mm (external dimension): * |
|
(2) Height in mm (external dimension): * |
|
(3) Depth in mm (external dimension): * |
|
| Surface: * |
| Order number | Article text | Number of nodes | Length per profile | Amount | Total length profile requirement |
|---|---|---|---|---|---|
 CCadro Glass shelf profile / side / shelf profile, grooved |
2 | 4 | |||
| Cadro Base profile |
2 | 4 | |||
| Cadro Base profile |
2 | 4 |
| Result | Amount | Total length profile requirement |
|---|---|---|
| Total length profile requirement side/floor profile | *Note: The total length does not take into account any saw cut, but is an addition of the required cut lengths. |
|
| Total length profile requirement basic profile | *Note: The total length does not take into account any saw cut, but is an addition of the required cut lengths. |
| Order number | Article text | Amount |
|---|---|---|
(4) |
||
| Cadro Threaded stud, M5 |
||
| Cadro Cover cap for M5 |
| Order number | Article text | Amount | Note |
|---|---|---|---|
| Cadro Wall mount, concealed |
1 Set | Option 1 |
|
| Cadro Cover cap, Ø 10 mm |
2 | Option 2 |
| Glass shelves | Cutting dimensions | Amount |
|---|---|---|
(5) Bottom |
2 |