Configuration wall unit
The Cadro wall unit is equipped with 2 hinged doors. The carcase sides, the middle wall and the rear wall are firmly fixed with connecting fittings and matching dowels. For wall mounting, you can choose between direct wall mounting through the profile or concealed wall mounting, for which a cut-out in the profile is necessary.
Please enter the external dimensions of the wall unit below, select the desired surface and then click on the Start button:
| Value | Input |
|---|---|
| (1) Width in mm (external dimension): * | |
| (2) Height in mm (external dimension): * | |
| (3) Depth in mm (external dimension): * | |
| Surface: * |
| Order number | Article text | Number of nodes | Length per profile | Amount | Total length profile requirement |
|---|---|---|---|---|---|
 CCadro Glass shelf profile / side / shelf profile, grooved |
2 | 4 | |||
| Cadro Base profile |
2 | 4 | |||
| Cadro Base profile |
2 | 4 |
| Result | Amount | Total length profile requirement |
|---|---|---|
| Total length profile requirement side/floor profile |  *Note: The total length does not take into account any saw cut, but is an addition of the required cut lengths. |
|
| Total length profile requirement basic profile | *Note: The total length does not take into account any saw cut, but is an addition of the required cut lengths. |
| Order number | Article text | Amount |
|---|---|---|
| (4)(4) Cadro Connecting node, 3-way, 3D |
||
| Cadro Threaded stud, M5 |
||
| Cadro Cover cap for M5 |
| Order number | Article text | Amount | Note |
|---|---|---|---|
| Cadro Wall mount, concealed |
1 Set | Option 1 |
|
| Cadro Cover cap, Ø 10 mm |
2 | Option 2 |
|
| (5) Screw in dowel DU 321, 6.7 mm, galvanised |
20 | Fixing sides and rear panel | |
| (6) Screw in dowel DU 321, 6.7 mm, galvanised |
4 | Attachment centre wall | |
| (7) VB 35 / 16 for 16 mm shelves |
4 | Fixation VB | |
| (8) Sensys 110° hinge (Sensys 8645i), B 12.5 |
4 | ||
| (9) Cross mounting plate with direct height adjustment,
in obsidian black, hole line 37 x 32 mm,
with Euro screws (for hole ø 5 x 12 mm), distance 0 mm |
4 | ||
| Cover cap for Sensys hinge arm (embossed with Hettich logo) |
4 | ||
| Cover cap for Sensys hinge cup (for drilling pattern TH / TS) |
4 | ||
| (10) Handle Cadro, drill hole spacing 128 |
2 | Other handles and knobs |
|
| Handle fixing screws, M4 x 22 |
4 | Suitable for front thickness 16mm. |
| Wooden floors | Cutting dimensions | Amount |
|---|---|---|
| (11) Bottom panelWhen calculating the wooden floors, 1 mm air was used as tolerance compensation, i.e. each side 0.5 mm smaller. |
2 | |
| (12) Side panelWhen calculating the wooden floors/back wall in combination with VB's, 0 mm air was calculated. |
3 | |
| (13) Back panelWhen calculating the wooden floors/back wall in combination with VB's, 0 mm air was calculated. |
1 | |
| (14) Front panelThe dimensions take into account 2 mm clearance all round per front and a centre joint of 2 mm. |
2 |