FAQ - TopLine XL

In this section frequently asked questions are answered and some product features are indicated.


Select a topic
show all questions

Recently asked questions

  • TopLine XL

    What is soft colliding and how does it work?

  • TopLine XL

    How can I setup the door offset?

    You can watch a video of the door offset setup at TopLine XL - Adjustment.


  • TopLine XL

    How do I adjust the height?

    You can watch a video on height adjustment at TopLine XL - Adjustment.


  • TopLine XL

    With which bore diameter do aluminium framed doors need to be predrilled?

    Aluminium framed doors need to be predrilled with 2.5 mm bore diameter.

    Please note the permanent 5 mm drilling requirements as part of the TopLine XL drilling pattern for positioning the guiding parts.

  • TopLine XL

    How do I customise and install the cover profile of the front most door?

    The TopLine XL plastic cover profile is used for covering the runner parts of the front most door. The delivery status of 2.000 mm length (inside profile set and sold separately) can be cut to individual lengths.

    Following formula is important for cutting the profile:

    length cover profile = door width - 5 mm

    The profile can be lacquered according the individual colour scheme of the door or cabinet. The cover profile can be easily clipped into the designated slots in the runner parts.

    For this the clips can be positioned in a flexible way - according the runner part positions on the door.