FAQ - WingLine L

In this section frequently asked questions are answered and some product features are indicated.

Search

Select a topic
show all questions

Results:

  • WingLine L

    The door opens too slowly.

    1. Solution approach

    • The cabinet is not in the scale and must be aligned.
    • The doors must be aligned.
    • The doors are aligned, but the hinges are under tension. Make sure that the joint front to body is even.

    To the video

    2. Solution approach

    The running and guide profiles are not mounted parallel to the upper and lower floor.

    • The profiles must be mounted in parallel with the mounting aid.

    To the video

    3. Solution approach

    • The door has been lowered too far by the height adjuster, making guide component scrape on profile.
      • Raise the door with the aid of the height adjustment until the guide part does not grind.
    • The door has been pulled up to high by the height adjuster.
      • The door must be lowered via the height adjustment so that it runs smoothly.

    To the video

    4. Solution approach

    • The guide part is not locked to the profile.

    To the video

  • WingLine L

    The door opens too slowly.

    1. Solution approach

    • The cabinet is not in the scale and must be aligned.
    • The doors must be aligned.
    • The doors are aligned, but the hinges are under tension. Make sure that the joint front to body is even.

    To the video

    2. Solution approach

    The running and guide profiles are not mounted parallel to the upper and lower floor.

    • The profiles must be mounted in parallel with the mounting aid.

    To the video

    3. Solution approach

    • The door has been lowered too far by the height adjuster, making guide component scrape on profile.
      • Raise the door with the aid of the height adjustment until the guide part does not grind.
    • The door has been pulled up to high by the height adjuster.
      • The door must be lowered via the height adjustment so that it runs smoothly.

    To the video

    4. Solution approach

    • The guide part is not locked to the profile.

    To the video

  • WingLine L

    The door sags in closed position.

    The profile sags, because the last drill hole / fixing point is too far from the profile end. The max. distance from first / last hole from profile end 40.0 mm

  • WingLine L

    The door sags in closed position.

    The profile sags, because the last drill hole / fixing point is too far from the profile end. The max. distance from first / last hole from profile end 40.0 mm

  • WingLine L

    The door springs back in open position.

    A stay open element has to be installed.

  • WingLine L

    The door springs back in open position.

    A stay open element has to be installed.

  • WingLine L

    The door tilts when the closing movement is initiated.

    1. Solution approach

    The central hinge has been mounted incorrectly or the pivot point offset is not correct.

    • Mount the central hinge according to the assembly instructions.

    2. Solution approach

    The guide part is not locked to the profile.

     

  • WingLine L

    The door tilts when the closing movement is initiated.

    1. Solution approach

    The central hinge has been mounted incorrectly or the pivot point offset is not correct.

    • Mount the central hinge according to the assembly instructions.

    2. Solution approach

    The guide part is not locked to the profile.

     

  • WingLine L

    When opening, runner and guide parts hit the body side loudly.

    Rubber stops must be fitted to running and guide components.

  • WingLine L

    When opening, runner and guide parts hit the body side loudly.

    Rubber stops must be fitted to running and guide components.