The soft-colliding function is integrated in the guiding part of the front most door, which is positioned in the center of the cabinet. If two doors are opened at the same time the soft-colliding will buffer the force to lower collision noises.

• To the video

This value is a recommendation and an example. For the case of aluminium or wooden framed doors these door types need a minimum frame width of 50 mm. The overlapping of doors can be reduced to 0 mm, if needed.

Please first check the installation position of the integrated clips. The guiding wheels need to be clipped out before pushing the doors into the guiding profile. If this still does not work, please check the level of height adjustment and lower the level whenever needed to improve the space between the guiding wheel and the guiding profile. After door assembly the height can be adjusted to the required level again (see height adjustment facility in the installation manual).

If the soft-guiding dampers are already in place, when doors are installed next, the risk of pushing out the dampers at the profile ends is relatively high - especially if the door mounting position is more on the outside of the cabinet. Please make sure that the soft-guiding dampers are clipped into the guiding profile after installing the doors.

The door overlay of max. 25 mm can be changed by finding an individual position of the end stops inside the running and guiding profile (change of C measurement).

Caution: if passe-partout-frames/frame constructions are coming along with the cabinet, please commence a closing test first and reduce the door overlay to minimise damages to doors and frame.