FAQ - TopLine XL

In this section frequently asked questions are answered and some product features are indicated.

Search

Select a topic
show all questions

Results:

  • TopLine XL

    Does using the height adjustment influence the function of soft-closing/soft-opening and lift-off guard?

    The height adjustment is completely decoupled from the damper and the lift-off guard. The height adjsutment of a door does not influence the interfaces lift-off guard and activator-to-damping.

    Note: only the damper base adapter, which is used to mount the soft-closing/soft-opening unit to the runner part is influenced by the individual height adjustment. If it is not easy to close the clip of the damper, the height adjustment needs to be lowered accordingly and can be readjusted afterwards.

  • TopLine XL

    Does using the height adjustment influence the function of soft-closing/soft-opening and lift-off guard?

    The height adjustment is completely decoupled from the damper and the lift-off guard. The height adjsutment of a door does not influence the interfaces lift-off guard and activator-to-damping.

    Note: only the damper base adapter, which is used to mount the soft-closing/soft-opening unit to the runner part is influenced by the individual height adjustment. If it is not easy to close the clip of the damper, the height adjustment needs to be lowered accordingly and can be readjusted afterwards.

  • TopLine XL

    How can I setup the door offset?

    You can watch a video of the door offset setup at TopLine XL - Adjustment.

  • TopLine XL

    How can I setup the door offset?

    You can watch a video of the door offset setup at TopLine XL - Adjustment.

  • TopLine XL

    How do I adjust the height?

    You can watch a video on height adjustment at TopLine XL - Adjustment.

  • TopLine XL

    How do I adjust the height?

    You can watch a video on height adjustment at TopLine XL - Adjustment.

  • TopLine XL

    How do I change the door offset?

    In the outer guiding part of the rear most door an elevating screw is integrated to change the door affset between 0 mm (flush opening) and 50 mm.

    Note: in order to have complete flush opening of doors the cabinet construction needs to fit to this requirement (e.g. no protruding side panels).

  • TopLine XL

    How do I change the door offset?

    In the outer guiding part of the rear most door an elevating screw is integrated to change the door affset between 0 mm (flush opening) and 50 mm.

    Note: in order to have complete flush opening of doors the cabinet construction needs to fit to this requirement (e.g. no protruding side panels).

  • TopLine XL

    How do I change the door overlay?

    The door overlay of max. 25 mm can be changed by finding an individual position of the end stops inside the running and guiding profile (change of C measurement).

    Caution: if passe-partout-frames/frame constructions are coming along with the cabinet, please commence a closing test first and reduce the door overlay to minimise damages to doors and frame.

  • TopLine XL

    How do I change the door overlay?

    The door overlay of max. 25 mm can be changed by finding an individual position of the end stops inside the running and guiding profile (change of C measurement).

    Caution: if passe-partout-frames/frame constructions are coming along with the cabinet, please commence a closing test first and reduce the door overlay to minimise damages to doors and frame.

Recently asked questions

  • TopLine XL

    What is soft-colliding and where do I need it for?

    The soft-colliding function is integrated in the guiding part of the front most door, which is positioned in the center of the cabinet. If two doors are opened at the same time the soft-colliding will buffer the force to lower collision noises.

  • TopLine XL

    The catalogues show a door overlapping of 50 mm as a standard. Is this value binding or can it be changed in specific applications?

    This value is a recommendation and an example. For the case of aluminium or wooden framed doors these door types need a minimum frame width of 50 mm. The overlapping of doors can be reduced to 0 mm, if needed.

  • TopLine XL

    The fast assembly function of the doors by clipping the guidings into the guiding profile does not work.

    Please first check the installation position of the integrated clips. The guiding wheels need to be clipped out before pushing the doors into the guiding profile. If this still does not work, please check the level of height adjustment and lower the level whenever needed to improve the space between the guiding wheel and the guiding profile. After door assembly the height can be adjusted to the required level again (see height adjustment facility in the installation manual).

  • TopLine XL

    When installing the doors, the soft-guiding is pushed out of its base. Why?

    If the soft-guiding dampers are already in place, when doors are installed next, the risk of pushing out the dampers at the profile ends is relatively high - especially if the door mounting position is more on the outside of the cabinet. Please make sure that the soft-guiding dampers are clipped into the guiding profile after installing the doors.

  • TopLine XL

    How do I change the door overlay?

    The door overlay of max. 25 mm can be changed by finding an individual position of the end stops inside the running and guiding profile (change of C measurement).

    Caution: if passe-partout-frames/frame constructions are coming along with the cabinet, please commence a closing test first and reduce the door overlay to minimise damages to doors and frame.