Configuration shelf I

The wall unit shelf version I is equipped with 2 shelves and a back panel. The shelves are firmly screwed in place, the back panel is easily removable via a fastening with ball catches. For wall mounting, you can choose between direct wall mounting through the profile or concealed wall mounting, for which a cut-out in the profile is necessary.

Please enter the external dimensions of the shelf below, select the desired surface and then click on the start button:

Value
Width max. 1200 mm
Height max. 1200 mm
Depth max. 400 mm
Input
(1)
Width in mm (external dimension): *
(2)
Height in mm (external dimension): *
(3)
Depth in mm (external dimension): *
Surface: *
Order numberArticle textNumber of nodesLength per profileAmountTotal length profile requirement
   CCadro Glass shelf profile / side / shelf profile, grooved24
   Cadro Base profile 24
   Cadro Base profile 24
ResultAmountTotal length profile requirement
Total length Profile requirement Side/floor profile
  *Note: The total length does not take into account any saw cut, but is an addition of the required cut lengths.
Total length Profile requirement Basic profile
  *Note: The total length does not take into account any saw cut, but is an addition of the required cut lengths.
Knots & Fixing
Order numberArticle textAmount
   (4)
 Cadro Connecting node, 3-way, 3D
   Cadro Threaded stud, M5
   Cadro Cover cap for M5
Accessories
Order numberArticle textAmountNote
   Cadro Wall mount, concealed1 SetOption 1
  
   Cadro Cover cap, Ø 10 mm 2Option 2
  
   Cadro Ball bearing locking fixture4Rear panel mounting
Wooden floors
Wood floorsCutting dimensionsAmount
(5)
 Bottom		2
(6)
 Rear panel		1
Note:
Cut size corresponds to finished size of board incl. edging.
When calculating the wooden floors, 1 mm air was calculated as tolerance compensation, i.e. each side 0.5 mm smaller.

You can easily export the article list and import it into the Hettich eShop.